Lug type butterfly valve (threaded holes), type 1140

This butterfly valve is a lug type valve with threaded holes and can be used for many applications. The valve can be used as a stopper, a tap for discharging at the end of the pipeline, open/close and flow control. The threaded holes make it easy to install or uninstall from the pipeline. Operation can be manual, pneumatic, hydraulic or electric.

** Please contact us for different sizes and pressures.

Description

Resilient-seated, centric butterfly valve to DIN-EN 593, Lug-type with threaded holes
Shut-off valve for drinking and service water up to 100°C
DN40 – 800, PN6 – 10 – 16
Face-to-face length DIN EN 558-1, basic series 20 (DIN 3202, series K1)

General information

  • Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar
  • Stable sealing seat due to liner with vulcanized support ring
  • For bolting between pipe flanges
  • As end-of-valve for full differential pressure
  • Tight in both flow directions
  • Anti-blowout shafts
  • Tightness to DIN EN 12 266-1, leak-rate A
  • Actuator flange connection acc. to ISO 5211
  • Body: cast iron GG25
  • Disc: ductile cast iron GGG50
  • Sleeve: EPDM
  • Valve shaft: stainless steel 1.4021
  • Maintenance-free shaft bearings
  • Certificate EN10204 3.1

Corrosion protection

  • Body: internally and externally epoxy coated, coating thickness >250 µm, blue RAL 5010
  • Disc: epoxy coated

Additional information

DN/NPS

DN40 – DN800 (1,5” – 32”)

Operating pressure

PN6, PN10, PN16

Flange connection

ANSI CL150, PN6, PN10, PN16

Top flange

ISO 5211

Marking

EN 19

Face to face length

EN 558-1/20

Test standard

EN 12266-1

Application

Dams & hydropower, HVAC, Industrial, Irrigation, Power plants, Sewage & wastewater treatment, Water treatment

Datasheets (PDF)

Type 1140 concentric butterfly valve datasheet
Gearbox & AUMA actuator selection table
Sleeve selection
Type 1140 concentric butterfly valve tender text