2- 12 A-USP2 RESILIENT WEDGE GATE VALVES - M.J. x FL.
2- 12 A-USP2 RESILIENT WEDGE GATE VALVES - M.J. x FL.
Catalog numbers:
- A-USP2-16 mechanical joint x flanged ends (with accessories unassembled)
- A-USP2-19 mechanical joint x flanged ends (less accessories)
Specifications:
- Sizes – 2”, 3”, 4", 6", 8", 10", 12"
- Meets or exceeds all applicable requirements of ANSI/AWWA C509 and C515, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 and 372
- Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
- Mechanical joint end complies with ANSI/AWWA C111 Standard
- Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surface
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut – open left or open right
- 350 psig (1725 kPa/17 barg) maximum working pressure 700 psig (3450 kPa/35 barg) static test pressure
- UL Listed, FM Approved: 350 psig (1725 kPa/17 barg)
- Designed for potable water applications
Options*:
- Position indicators
- Stainless steel stem: Type 304, Type 316
- EPDM Disc and O-rings
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- Handwheel
Resources:
- Manual
- Installation Preparation Check List
- Suggested Specifications
- Product Specifications
- Submittal Drawing 1 (U7420)
- Submittal Drawing 2 (U7399)
- Certificate of Compliance
Dimension |
Nominal Size |
||||||
2” |
3” |
4" |
6" |
8" |
10" |
12" |
|
A |
9.88 |
12.38 |
14.19 |
18.00 |
21.50 |
25.50 |
28.62 |
L |
2.50 |
2.50 |
2.50 |
2.50 |
2.50 |
2.50 |
2.50 |
N |
4.62 |
7.50 |
9.12 |
11.12 |
13.37 |
15.62 |
17.88 |
O |
4--.75 |
4--.75 |
4--.88 |
6--.88 |
6--.88 |
8--.88 |
8--.88 |
Q (bore) |
2.30 |
3.30 |
4.30 |
6.30 |
8.30 |
10.30 |
12.30 |
OO (bolt circle diameter) |
4.75 |
6.19 |
7.50 |
9.50 |
11.75 |
14.00 |
16.25 |
R |
6.00 |
7.50 |
9.00 |
11.00 |
13.50 |
16.00 |
19.00 |
UU |
4.75 |
6.00 |
7.50 |
9.50 |
11.75 |
14.25 |
17.00 |
FF |
8.39 |
8.8 |
9.50 |
11.06 |
12.09 |
13.94 |
14.50 |
B (number and size of holes) |
4--.75 |
4--.75 |
8--.75 |
8--.88 |
8--.88 |
12--1.00 |
12--1.00 |
Turns to open |
8 |
11 |
14 |
20.5 |
26.5 |
33 |
38.5 |
Weight* |
56 |
67 |
115 |
168 |
275 |
400 |
570 |
Catalog Part No. |
Description |
Material |
Material Standard |
G-16 |
Bonnet Bolts & Nuts |
316 Stainless Steel |
ASTM F593 (bolt) ASTM F594 (nut) |
G-41 |
Stuffing Box Bolts & Nuts |
316 Stainless Steel |
ASTM F593 (bolt) ASTM F594 (nut) |
G-49 |
Stem O-rings (3) |
Nitrile |
ASTM D2000 |
G-200 |
Wrench Nut Cap Screw |
316 Stainless Steel |
ASTM F593 |
G-201 |
Stuffing Box O-ring |
Nitrile |
ASTM D2000 |
G-202 |
Wrench Nut |
Ductile Iron |
ASTM A536 ▼ |
G-203 |
Stem |
Bronze |
ASTM B138 |
G-204 |
Hand Wheel (not shown) |
Cast Iron |
ASTM A126 CL.B |
G-205 |
Stem Nut |
Bronze |
ASTM B584 |
G-206 |
Guide Cap Bearings |
Acetal |
- |
G-207 |
Stuffing Box with dirt seal** |
Ductile Iron+++ Nitrile |
ASTM A536 ▼ ASTM D2000 |
G-208 |
Anti-friction Washers (2) |
Acetal |
- |
G-209 |
Wedge, Rubber Encapsulation |
Ductile Iron* SBR |
ASTM A536 ▼ ASTM D2000 |
G-210** |
Bonnet |
Ductile Iron |
ASTM A536 ▼ |
G-211** |
Bonnet O-ring ++ |
Nitrile |
ASTM D2000 |
G-212** |
Body |
Ductile Iron |
ASTM A536 ▼ |
**Dirt seal on 4” - 12” valves
▼ Material strength ASTM A536 65-45 minimum
+Manufacturer's option to change material to ductile iron ASTM A536
++ 3" valves use a bonnet gasket
+++ 3" stuffing boxes are cast iron ASTM A126 class B+